Form C Micro-Generation Connection Application

For Connection of Micro-Generation Facilities of ≤ 10 kW

This form is applicable to individual or multiple generating units at the Customer’s facility with total nameplate rating of 10 kW or less. Your generation facility must generate electricity from a renewable energy source that is wind, water, solar radiation, or agricultural biomass.

Inverter-based generating units must not inject DC greater than 0.5% of the full rated output current at the point of connection of the generating units. The generated harmonic levels must not exceed those given in the CAN/CSA-C61000-3-6 Standards.

For generation size up to 10 kW, a Connection Impact Assessment will not be required and Brant County Power will not perform such an assessment. There may be a limitation on the number of micro-generation facilities that can be connected to the same distribution feeder.

IMPORTANT: All fields below are mandatory, except where noted. Incomplete applications may be returned by Brant County Power Inc.

NOTE: Applicants are cautioned NOT to incur major expenses until Brant County Power approves to connect the proposed generation facility.

The following information is required for all generators with total generation of up to 10 kW.

Date of Application *

Month

Day

Year

microFIT Reference Number *

Please ensure you have received a Conditional Offer from the OPA before applying. Reference number not required for Net Metering applications.

Project/Customer Name *

Proposed In-Service Date *

Month

Day

Year

Project Information

Owner

Company/ Person *

Contact *

Mailing Address *

Phone *

Fax

E-mail *

Engineering Consultant (Electrical)

Company/ Person

Contact

Mailing Address

Phone

Fax

E-mail

Project Location

Address *

City/Town/Township *

Lot Number(s) *

Concession Number(s) *

Program Type *

microFIT

Net Metering to microFIT Conversion

Net Metering

If Net Metering to microFIT Conversion

Existing Net Metering Customer upgrading generation size and/or technology/ fuel type, up to 10 kW (Complete all sections)

Existing Net Metering Customer with no upgrades in generation size and/or technology/ fuel type, up to 10 kW (Complete Customer Status, Project Size and Fuel Type)

Customer Status

Existing Brant County Power Customer? *

Yes

No

If yes, Brant County Power 10-digit Account Number

Are you a GST registrant? *

Yes

No

If yes, provide your GST registration number

Project Size

Number of Units *

Nameplate Rating of Each Unit * kW

Generator connecting on *

single phase

three phase

Existing Total Nameplate Capacity * kW

Proposed Total Nameplate Capacity * kW

If Other, please specify

Grid Interface Controller (if applicable)

Manufacturer

Model Number

Type of Connection

Select the Single Line Diagram below that is appropriate for your connection to the Brant County Power distribution system

Alternative #1 - Parallel Metering Connection

Alternative #2 - Stand-Alone Connection

Net Metering Connection

Alternative #1 - Typical Parallel Metering Connection

Alternative #2 - Stand-Alone Connection

Typical Net Metering Connection

By submitting a Form C, the Proponent authorizes the collection by Brant County Power Inc. (“Brant County Power”), of the information set out in the Form C and otherwise collected in accordance with the terms hereof, the terms of Brant County Power’s Conditions of Service, Brant County Power’s Privacy Policy and the requirements of the Distribution System Code and the use of such information for the purposes of the connection of the generation facility to Brant County Power’s distribution system.